Widget Heading
|
Dynamic Advanced Charts
|
Enter the name of the widget
as it is to appear in the heading.
|
Legend Layout
|
Horizontal
|
Alignment of the legend is
Horizontal or Vertical.
|
Legend Position
|
Top-Centre
|
The legend can be aligned in
various positions according to the options in the drop-down.
|
Summary Type
|
RAW
|
Shows either raw or
aggregated data. This can be Hourly, Daily, Monthly, Yearly or Raw (default).
The option of Drilldown on Periods means that the widget will adhere to the
month displayed on the dashboard, which may be current month or previous month
or any month that the user selects - the widget will then cycle through the
periods, e.g., if monthly then clicking on a day will show all the daily data.
Clicking on an hourly value will loop back to a yearly view. The option
Aggregated Value returns one value per series/row of all the data values within
the chosen Period Selection aggregated by the configured Line Summary.
|
Period Selection
|
Dashboard/Period Selector
|
If the user chooses
Dashboard/Period Selector then the date range of the chart will vary, according
to the dashboard or report, i.e. either the date picker on the dashboard or the
date picker on the report. If the user chooses Last N Values then the chart
will always show the last N values, as configured in the "No. Of Values" field.
The default is 14. If the user chooses Historical/Future Days then the chart
will show days before and after the current day, as configured in the
"Historical Days" and "Future Days" fields. The defaults are 5 and 2
respectively.
|
Historical Days
|
5
|
Configure the number of days
to show prior to the current day. Only used if the "Period Selection" of
Historical/Future Days is used.
|
Future Days
|
2
|
Configure the number of days
to show after the current day. Only used if the "Period Selection" of
Historical/Future Days is used. Note: The current day counts as 1, so a value
of 3 for example would show data from today (current day), tomorrow and the day
after.
|
No. of Values
|
14
|
If "Period Selection" is set
to Last N Values then this configuration is used. Specify the number of values
to display on the chart.
|
Drilldown (from chart or icon)
|
Engineering Charts
|
Choose between a drilldown to
Engineering Chart, a drilldown to a dashboard, a drilldown to a report, or no
drilldown at all.
Note: The icon is only displayed when the "Summary Period" is
set to Drilldown on Periods. With this setting, clicking the charts drills down
to a yearly/monthly/daily period, so it is not possible to initiate the
engineering chart from the chart. In this instance, the icon is used to enable
access to the engineering chart.
|
Dashboard List
|
blank
|
A list of all the dashboards
the user has access to.
|
Reports List
|
blank
|
A list of all the reports the
user has access to.
|
Drilldown Target
|
popup
|
Choose between a drilldown in
a new Popup or a drilldown in a New Window.
|
X Axis Date Format
|
Default
|
Specify the date format for
the X-Axis.
|
X Axis Label Font Size,
Rotation
|
Chart Default
|
Change the X-axis font size
and rotation if required. The syntax is pixel size, degrees - for example,
10px,315
|
Show Today Zone
|
Hide
|
Hide the zone, or show a
vertical bar as a marker for today's Zone, and included a label Zone &
Label.
|
Today Zone Colour
|
0
|
Set the colour for the today
zone. See Line Colour section for options.
|
Stacking Style
|
None
|
None - No stacking will
occur, series will be shown side by side. Normal - Stacking will be one series
on top of the other. Percent - The height of the stacking will be full height
and the series will be apportioned according to a percentage of 100%.
|
Y-Axis Labels
|
|
Enter a comma delimited list
of labels to use on the y-axes. An empty string indicates use the default
label. For example: My Label1,,Third Label - Will override the first 3 y-axis
labels with the first one being My Label1, the second one will be the default
label, and the third one will be Third Label. Note : The units from the y-axis
label will hide when the widget config Y-Axis Label (Title) is configured the
same as the units for the y-axis.
|
Y-Axis Behaviour
|
Viewport Scaling
|
Chart Default - The y-axis
scale will adjust to fit the max and min values within and just outside (the
date range) of the current viewport. Viewport Scaling - Scale each y-axis to
the data shown in the viewport (+/- 5%). Single Y-Axis - Put all points
regardless of units on single catch all y-axis (will also apply Viewport
Scaling on this option). Manual Scaling - Allow user to specify scales.
|
Y-Axis Scaling
|
[min]to[max],[min]to[max]...
|
Only applicable of "Y-Axis
Behaviour" is set to Manual Scaling. User keys the scales for each axis: e.g.,
0to100,-30to60,[min]to100,0to[max] In the above example: First y-axis is
configured to show 0 to 100. Second y-axis to show -30 to 60. Third y-axis to
show minimum data value to 100. Fourth y-axis to show 0 to maximum data value.
|
Y-Axis Tick Amount
|
Chart Default
|
Number of ticks each y-axis
should show. Blank for chart default.
|
Refresh Period
|
No Refresh
|
Select a refresh period from
the drop-down menu from between 15 seconds to 1 hour, or No Refresh at all.
|
Show Alarm Levels
|
None
|
Select which (if any) alarms
levels to show on the chart. None, All Alarms, High & Low Faults (both High
Fault and Low Fault), High & Low Alerts (both High Alert and Low Alert), or
individual alarm levels. If alarm levels are shown, then for which row is
specified by the "Alarm" column radio button within "Row Configuration". Alarm
levels can only be shown for a single row at a time. Note 1: Alarm levels are
only shown when "Show Alarms Levels" is set to anything other than None, and
the alarms are enabled on the point for the alarms levels chosen to show. Note
2: When the trace is showing more than one point (i.e. is aggregated) the
alarms levels will not be shown. Note 3: When the aggregation method is COUNT,
and the row is selected as the alarm level, the alarms levels will not be shown
(whether aggregated or not). Note 4: If the "Summary Type" is not Raw data (all
other options can aggregate data), alarm levels are not shown. Note 5: If the
"Stacking Style" is Normal or Percent, alarm levels are not shown. Note 6: If
the row/series selected as the alarm level is hidden (by clicking the legend),
the associated alarms levels will also be hidden.
|
3D Chart (Columns Only)
|
No
|
Yes to display columns in 3D,
No for 2D (default).
|
Show Vertical Grid
|
False
|
True - A vertical grid is
displayed within the chart. False - A vertical grid is not displayed within the
chart.
|
Set Alarm Labels (e.g.,
min::::max)
|
LowFault:LowAlert:HighAlert:HighAlarm:HighFault
|
Enter the name of the alarm
labels as they are to appear in the chart.
|
Show Logarithmic Scale Option
|
No
|
Switches left and/or right
y-axes to logarithmic scaling. This is used when there is a large range of
values.
|
Show Historical Zone
|
No
|
Displays a shaded area on the
chart from the beginning of the x-axis to the date/time right now.
|
Historical Zone Colour
|
Tan
|
Sets the colour of the shaded
historical zone.
|